Our quotations include for our standard Arris edge detail (or double chamfer as it’s also known). There is also a variety of other edge details that we’re able to fabricate to complete the look of your work surface if preferred. Take a look at some of the options available below…
Step Half Bullnose
New York New
There are five different sinks for which we can create various apertures within your work surface.
Undermount sink cut out whereby the edge to the aperture is polished.
Sink cut out containing polished edges to three sides.
Inset will require an un-polished/sawn cut out as the edges aren’t seen.
Counter Top (for bathrooms) will require a waste hole cut out.
Semi Recessed (for bathrooms) will require an unpolished/sawn cut out as the edges aren't seen.
Drainer grooves can be applied to any undermount or Belfast sink aperture to really give the wow factor to any kitchen.
Take a look at some of the design options available below…
We do not recommend that any hot pans are placed directly onto one of our work surfaces. As a solution, we can apply hot rod grooves and bars directly into the work surface.
As modern life unfolds, new and inventive kitchen gadgets are brought to our attention, like the pop-up socket which will require an aperture within the work surface. Depending on the design of the socket, we are able to top the lid with matching material. Take a look at some of the design options below…
Upstands and Splashbacks
Finish off your kitchen perfectly with matching upstands and splashbacks which can be any height and can include power-point socket apertures and shaping around extractor fans. Depending on the material, they are usually thinned down to 20mm for aesthetics.
To finish off the whole kitchen, the introduction of a granite or quartz windowsill really adds that finishing touch to making your worktop part of the key fixture in your kitchen. The incorporation of a windowsill also gives a fantastic appearance as the reflected light now bounces from two levels.